Home / Products / EASILER / Yisile-E Easy-tear Film For The HDPE Bottle Sealing Packing Of The Leisure Foods
Yisile-E Easy-tear Film For The HDPE Bottle Sealing Packing Of The Leisure Foods

Yisile-E Easy-tear Film For The HDPE Bottle Sealing Packing Of The Leisure Foods

The following information is based on the knowledge and experience we have actually mastered. We strongly recommend that users thoroughly and carefully test products before using them to verify whether they are suitable for users' own process conditions and uses, and suggest that we consult with our technicians. The above technical information is not regarded as any guarantee of us, and therefore,we do not bear any responsibility.

View: 303



This product uses?polyolefin as the main raw material?after three-tier CO-extrusion blown film.This easy-open?heat sealing film?is?based on PE substrate.And can be combined with general thin films (PET, OPP, PA, etc.) for different needs.


  • Suitable for the HDPE bottle sealing packing of the leisure foods such as yogurt, lactic acid drinks and so on.
  • Easy to open or use.
  • With lower sealing temperature.
  • Uniform in tearing strength,?no residue in the seal.
  • Can adjust?the difficulty of exposing the cover?according to the request?from customers.
  • Can choose different substrate(such as OPP,AL,PET,PA,etc.)?according to the request?from customers.
  • Can use pasteurization.

Technical indicators


Breaking load,N





EElongation at break?%





Heat-Seal Strength N/15mm(Heat sealing of PE sheet, 205℃,2.0s,0.35MPa)


⑴?The above data are for reference only, not the specification of the product.
⑵?Product mix?AL50//Yisile-E68

Usage method

●It is suggested that the temperature?should be controled?at 190-220 degrees C,0.35-0.65Mpa.
●Avoid?putting?oil material at?the sealing position?which?can affect the heat sealing performance.
●The pressure and drop test should?be carried out after the sealing is fully cooled.
●Ensure the sharpness of the die cutting tool?to?avoid the appearance of drawing and burr on the edge of the die cutting and affecting the appearance.
●Because of the differences in the processing equipment and processing technology between different manufacturers, it is suggested that the machine test should be carried out first.


Suit for the package of HDPE bottle for yogurt,lactic acid drinks and other leisure foods.

Matters need attention

●Prevent mechanical collisions?and be careful when loading the car.?In order to avoid the product aging?,the car should stop in the shade?when parking or unloading.
●It should be placed in a clean, dry, ventilated and cool storeroom under?no more than 35 degrees centigrade, ?and properly stacked with a distance from the heat source more than 2m, which can aviod direct light.
●When used, it should be used now and should not be placed in a high temperature workshop for a long time.



Related Products:

猫咪直播(破解版)/www 88btbt cnm/亚洲无线观看国产/成 人 片 免费播放